FB Powdercoating Gallery

[Murderface]

Here's some examples of stuff I've done. As you'll notice, sometimes I have a camera on me to take decent pictures and other times I don't get the chance to before I have to deliver the parts so a cell phone is used.

Enjoy :D

[Murderface]

15" BBS RS wheel centers:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs6.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs5.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs2.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs3.jpg

The owner was quite happy with them:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/bbs4.jpg

(not the lips he'll be using; these are just for mockup)
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/danwheel1.jpg

Check out his E30 M3 build thread:
http://forums.bimmerforums.com/forum/showthread.php?t=868240

[Murderface]

ABD Racing 1.8T intake manifold:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/abd1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/valve2.jpg

[Murderface]

1.8T valve cover, done to match ABD manifold above.
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/valve1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/valve3.jpg

[Murderface]

1.8T valve cover in pearl white with clearcoat...hard to capture the subtle pearl effect but it looked really good in the sun :)

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/whitevalve.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/whitevalve3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/whitevalve2.jpg

[Murderface]

Jetta GLI brakes:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes2.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes4.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes5.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes6.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes7.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes8.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/glibrakes9.jpg

[Murderface]

16" wheels:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/16s.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/16s3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/16s2.jpg

This is what the wheel above ^^^ looked like before:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/16b41.jpg

Closeup of curbage:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/16sb42.jpg

I fixed all the rash and powdercoated them :)

[Murderface]

My own brakes:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/brakes3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/brakeswheel2.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/brakes4.jpg

[Murderface]

Matching valve cover and intake manifold:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve4.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve5.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve6.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candymani1.jpg

Installed:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/candyvalve2.jpg

[Murderface]

Knight's helmet:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/knightshelmet1.jpg

Note reflectiveness:
http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/knightshelmet2.jpg

[Murderface]

1.8T valve cover:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/silvervalve3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/silvervalve2.jpg

[l88m22vette]

Nice brakes Murder ;) I LOVE the white valve cover...

[Murderface]

Thanks :) wish I would have had the chance to take better pics of it.

[AudiTurbo]

Great work! How much to fix my 16 inch sport wheels and powercoat them? Valve cover and intake manifold?

[Murderface]

PM sent:)

[Tmoney]

I had no clue you had this little section down here!!!! very nice work man. Hey youve prolly noticed this on the brakes======= when i did my TT's back brakes, i noticed that they were already covered with this rubberize layer, which turned out looking the best because it gave that High dollar caliper look. Unlike the front brakes which have the bumpy surface an not rubberized layer. Why exactly are the brakes in the back like that. If i could do that to the front, i redo mine right now

[Murderface]

I don't recall any "rubberized layer" ...I had the brakes sandblasted prior to doing them. I just noticed that the rears have a much smoother casting, I'm not sure why.

[Tmoney]

Exactly! It just looked so smooth that I figured something was coated over it but in this case it was just the casting. I wonder why the front brakes arent like that. I may have to holla at you sometime to do some work on mine.

[Murderface]

Exactly! It just looked so smooth that I figured something was coated over it but in this case it was just the casting. I wonder why the front brakes arent like that. I may have to holla at you sometime to do some work on mine.

I just ordered a nice looking gloss red, let me know if you ever want your brakes done :)

[VWdriver03]

thats some great work.

[Murderface]

Thanks Lucas, gonna have a lot of stuff coming soon, got a lot of stuff piled up that I'm waiting to do.

[Murderface]

Haven't updated this in a bit...did another set of BBS RS centers and centercaps:

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/wheel.jpg

[KrissrocK]

impressive

[Murderface]

Thanks kriss.

Above centers/centercaps with polished lips mocked up (I didn't do the lips btw)

http://i102.photobucket.com/albums/m96/lmaoxfilip/polishedlips.jpg

[Murderface]

Valve cover I did in flat black...it's a bit dirty since this was taken several months after the guy put it on:

http://i102.photobucket.com/albums/m96/lmaoxfilip/valve4.jpg

[KrissrocK]

aww man, can't wait to get mine now. I love the 034 cover.

[Murderface]

I've been busy... :)

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/group1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/cover1.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/cover3.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/cover2.jpg

KrissrockK's valve cover:
http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/krisscover1.jpg

Beat K03 housing I did...this is just as an example of what I can do for you BT guys' compressor covers:

http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/k031.jpg

Honda Prelude wheels in gold:
http://i102.photobucket.com/albums/m96/lmaoxfilip/POWDERCOATING/goldwheels1.jpg

[KrissrocK]

Man i hope he's getting them installed on a touchless machine, so less chances of damaging that nice pC job

[Murderface]

I've got a sweet project in the works...teaser:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fatfive.jpg

[Murderface]

And here's the finished product:

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/DSC01457a.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/DSC01460a.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/DSC01462a.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/DSC01464a.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/fbpc/DSC01469a.jpg

Custom two tone....white with black lug holes and inserts.

[Murderface]

These are the silver RSs I did, finally on the car:
http://i105.photobucket.com/albums/m213/kev66brennan/showngo2.jpg

http://i40.tinypic.com/bff69x.jpg

(The guy still needs to find a set of caps)

[Murderface]

Exhaust manifold, turbine housing and exhaust turndown done in high temp silver. While high temp colors aren't the most glamorous, they look way better than disgustingly rust-caked parts such as these when they came to me.

http://i102.photobucket.com/albums/m96/lmaoxfilip/edited.jpg

http://i102.photobucket.com/albums/m96/lmaoxfilip/edited2.jpg

[ConmanTT420]

U think u could do high temp. black on my exhuast tips? would that hold up?

[W3rkd]

Do you have an email I can reach you at? I'm wondering how much Valve cover, Charge pipe, Fuel rail, Intake mani & RS4 rims would run me. achtunglarm @ yahoo . com is mine.

[Murderface]

Girl with the two tone fat fives realized that her car wasn't such a bright white color anymore and that the wheels were actually brighter than the car...

So I redid them per her request to flat black with white pinstripe:
http://i102.photobucket.com/albums/m96/lmaoxfilip/1zz583o.jpg

[Murderface]

Closer pic:
http://i102.photobucket.com/albums/m96/lmaoxfilip/wheels1.jpg

[CCA4]

You do great work man!

I gotta ask though, whats with the helmet? lol. Lookin through the pics it was like valve cover...valve cover...intake mani...wheels...HELMET... :lol:

[l88m22vette]

Do you know what ex. manifold you PC'd silver? I can't read the name

[Cincy]

Its not for a dub if thats what youre thinking. Not sure what flange is on that turbo. Its looks like an IHI

[Murderface]

Haha the helmet was for a friend...it was starting to rust.

The manifold says Greddy so as you can imagine it's for a Mitsubishi turbo, TD0-13 someting iirc...for a Honda...I think a D-series.