PDA

View Full Version : TT exhaust manifold

Audi180TT
01-31-2009, 12:49 PM
Hello all... any help would be appreciated.. I bought a 2000 Audi TT Quattro.. and i got an exhaust leak and fixed it... it was the flex pipe. now my TT sounds like a semi truck again... and i did a smoke test and its the manifold.. its cracked.. well ive been browsin the web for manifolds.. cast or stainless tube.. either.. and i CANNOT find much.. If anyone could help my out itd be great. Im new to audi.. but love them.. Thank you!
Cincy
01-31-2009, 12:54 PM
All you need is a stock replacement. Here is a used stock one for $50 http://forums.vwvortex.com/zerothread?id=4056527
225ttroadster
01-31-2009, 02:38 PM
All you need is a stock replacement. Here is a used stock one for $50 http://forums.vwvortex.com/zerothread?id=4056527

do what he says.... or design a custom drag style turbo mani for us!
CoreyHarTT
01-31-2009, 03:47 PM
If you're planning on keeping everything stock, you can do what Cincy suggested and get a stock replacement, or you can talk to Kinetic Motorsport and pick up their high flow K03s manifold. I ran them on both of my stock 1.8Ts with a nice boost in torque :thumbup:

The high flow manifold will run you around $395 though, so a used stock manifold is much more cost effective.
Cincy
01-31-2009, 05:05 PM
Ebay has some knock off cast manifolds for about $120 shipped. Just make sure you get the gti/jetta/180tt manifold. The A4/passatt manifold puts the turbo on the other side
crazyeight
06-03-2009, 01:08 PM
wich one to use with stock 225 then ?


and im not sure if i have understood but im curious. manifolds and downpipes you use with 180+bt are they the same for 225+bt ?
225tt
06-03-2009, 01:40 PM
Should the turbo be on the belt side or tranny side of the manifold, i always thought belt side.
Cincy
06-03-2009, 02:26 PM
wich one to use with stock 225 then ?


and im not sure if i have understood but im curious. manifolds and downpipes you use with 180+bt are they the same for 225+bt ?

The 225 has to keep the stock manifold, there is no upgraded cast manifold.

The 225 and 180q both can use the same manifold and dp with a BT setup

Should the turbo be on the belt side or tranny side of the manifold, i always thought belt side.

Depends on how you want to run it and the manifold you use. Some run it one way, others do it the other.