Not another catch can question

[AWDrifter]

Im building a catch can, wondering what the baffles should look like inside. Cant find any pictures to show what others have done. Any suggestions? TAI

[Cincy]

It just needs to be able to slow down the air so it turns back to oil and the air can escape. Most cans will most likely need some steel wool to make it work like it should unless it has different chambers

[AWDrifter]

This is kinda what im thinking. Combining the 2 breather ports and them in on the side. A baffle to make the air go down through some sswool and a small breather filter on top. Not going back to the tip.

http://i341.photobucket.com/albums/o378/lolsomepics/catchcan.jpg

[Cincy]

that will work. just make sure you dont let the oil level get high enough to reach the divide