New BIG setup coming together

[Cincy]

Just scored a barely used .63 gt3582r (gt35/40, gt35r) with the nicer GT turbine housing. Still collecting parts and I will add them as they come. So far i have:

Manifold
35r
AWP wiring harness

This is all going in my lightened FWD 2000 TT (~2800lbs now) with:

2008cc motor with 10.16:1 compression
- scat rods
- 83mm wiseco pistons
- AEG crank

I will update this thread as the parts come in. Im in no real hurry so it should be a few months before im ready for install.


For anyone that cares, here is the compressor map with a 1.8t and 2.0 mapped out on them


1.8T



2.0T

]